Quantcast

 

Fever Racing
VQ35DE Race-Block Builds
 Here is the breakdown of the current VQ35DE platform motor build stages we offer. These are outlines. If you prefer something slightly different for your specific build, we can accommodate you. For example, if you want a CP Pistons set of pistons in the stage 1 than we offer… we can make that change and adjust the costs accordingly. Based on availability, of course. For our Stage 1-Stage 4 VQ’s we try to keep these components IN STOCK at all times. We buy these components IN BULK so that we do not run out. It has been a challenge over the last 12 months but we have been able to meet demand, for the most part!
Let me know if you have any thoughts or questions you want to ask.
Doug
Stage 1 VQ35 Long Block - Nissan 350z/Infiniti G35
Item# VQ-Stage1-Long
Regular price: $5,300.00
Product Description
 
This Stage 1 VQ35 Long Block is good for someone who wants a safe turbo charged or super charged Nissan 350z or Infiniti G35 without the worry of detonation. The stage 1 package is good for up to 550 Rwhp.
VQ35DE Engine Build 2

This Package includes:

Wiseco Pistons .020 over
Eagle/SCAT H Beam Rods
ARP 2000 Rod Bolts
Block inspected, hot-tanked, & cleaned
Block-to-head surfaces decked
Block Bored and Honed using a Torque Plate
Rotating assembly balanced
Crank magnafluxed and the journals micro-polished
New Moly coated Race Spec main bearings installed (ACL or King bearings)
New Moly coated Race Spec rod bearings installed
Piston rings hand-ground to fit motor spec
Block prepped and assembled
New OEM Head Gaskets
Heads inspected and cleaned
Cylinder head to block surface decked
3 angle valve job
New Viton Valve stem seals installed
Valve Stem Heights set
Cold Clearance set for stock cams
Heads prepped and assembled then installed to block
OEM head bolts
New OEM Rev-up Oil Pump


Stage 2 VQ35 Long Block - Nissan 350z/Infiniti G35
Item# VQ-Stage2-Long
Regular price: $5,900.00
Product Description
 
This Stage 2 VQ35 Long Block is good for someone who wants a safe turbo charged or super charged Nissan 350z or Infiniti G35 without the worry of detonation. The stage 2 package is for up to 600 Rwhp
 VQ35DE Engine Build 1
This Package includes:

Products in bold are upgraded from previous stage

Wiseco Pistons .020 over
Eagle/SCAT H Beam Rods
ARP 2000 Rod Bolts
Block inspected, hot-tanked, & cleaned
Block-to-head surfaces decked
Block Bored and Honed using a Torque Plate
Rotating assembly balanced
Crank magnafluxed and the journals micro-polished
New ARP main studs (torqued to 60 ft/lbs)
Line bore the main bearings to cold oil main bearing clearance
New Moly coated Race Spec main bearings installed (ACL or King bearings)
New Moly coated Race Spec rod bearings installed
Piston rings hand-ground to fit motor spec
Block prepped and assembled
New Multi-layer steel Head Gaskets
New ARP head studs (torqued to 95 ft/lbs)
Heads inspected and cleaned
Cylinder head to block surface decked
3 angle valve job
New Viton Valve stem seals installed
Valve Stem Heights set
Cold Clearance set for stock cams
Heads prepped and assembled then installed to block
OEM head bolts
New OEM Rev-up Oil Pump

Stage 3 VQ35 Long Block - Nissan 350z/Infiniti G35
Item# VQ-Stage3-Long
Regular price: $7,200.00
Product Description
 
This Stage 3 VQ35 Long Block is good for someone who wants a safe turbo charged or super charged Nissan 350z or Infiniti G35 without the worry of detonation. The stage 2 package is for up to 600 Rwhp.
VQ35DE Engine Build 3

This Package includes:

Products in bold are upgraded from previous stage

Wiseco Pistons .020 over
Eagle/SCAT H Beam Rods
ARP Rod Bolts
Block inspected and cleaned
Block redecked
Block Bored and Honed using a Torque Plate
Rotating assembly balanced
Crank magnafluxed and the journals micro-polished
New Moly coated Race Spec main bearings installed
New Moly coated Race Spec rod bearings installed
Block assembled
New OEM Head Gaskets
Heads inspected and cleaned
Heads redecked
JWT S1, S2, C2, or "S7 RevUp" Upgraded Cams
JWT Heavy Duty Valve Springs
5 angle radius cut valve job
New OEM Valve stem seals installed
Valve Stem Heights set
Cold Clearance set for stock cams
Heads assembled
New OEM Rev-up Oil Pump

Stage 4 VQ35 Long Block - Nissan 350z/Infiniti G35
Item# VQ35-Stage4-Long
Regular price: $7,800.00
Product Description
 
This Stage 4 VQ35 Long Block is good for someone who wants a safe turbo charged or super charged Nissan 350z or Infiniti G35 without the worry of detonation. The stage 2 package is for up to 600 Rwhp
VQ35DE Engine Build 4
This Package includes:

Products in bold are upgraded from previous stage

Wiseco Pistons .020 over
Eagle/SCAT H Beam Rods
ARP Rod Bolts
Block inspected and cleaned
Block redecked
Block Bored and Honed using a Torque Plate
Rotating assembly balanced
Crank magnafluxed and the journals micro-polished
New ARP main studs (torqued to 60 ft/lbs)
Line bore the main bearings to cold oil main bearing clearance
New Moly coated Race Spec main bearings installed
New Moly coated Race Spec rod bearings installed
Block assembled
New Multi-layer steel Head Gaskets
New ARP head studs (torqued to 95 ft/lbs)
Heads inspected and cleaned
Heads redecked
JWT S1, S2, C2, or "S7 RevUp" Upgraded Cams
JWT Heavy Duty Valve Springs
5 angle radius cut valve job
New OEM Valve stem seals installed
Valve Stem Heights set
Cold Clearance set for stock cams
Heads assembled
New OEM Rev-up Oil Pump
Stage 5 VQ35 Long Block - Nissan 350z/Infiniti G35
Item# VQ-Stage5-Long
Regular price: $9,700.00
Product Description
 
This Stage 5 VQ35 Long Block is good for someone who wants to push the limits of their turbo charged Nissan 350z or Infiniti G35 without the worry of detonation. The stage 3 package is good for up to 650 Rwhp
VQ35DE Engine Build 5
This Package includes:

CP or Arias Extreme Pistons .020 over
Pauter or Carillo Rods
ARP Rod Bolts
Block inspected and cleaned
Block redecked
Block Bored and Honed using a Torque Plate
Rotating assembly balanced
Crank magnafluxed and the journals micro-polished
New Moly coated Race Spec main bearings installed
New Moly coated Race Spec rod bearings installed
Block assembled
New Multi-layer steel Head Gaskets
New ARP head studs (torqued to 95 ft/lbs)
Heads inspected and cleaned
Heads redecked
JWT S1, S2, C2, or "S7 RevUp" Upgraded Cams
JWT Heavy Duty Valve Springs
5 angle radius cut valve job
New OEM Valve stem seals installed
Valve Stem Heights set
Cold Clearance set for stock cams
Heads assembled
New OEM Rev-up Oil Pump


Stage 6 VQ35 Long Block - Nissan 350z/Infiniti G35
Item# VQ-Stage6-Long
Regular price: $10,400.00
Product Description
 
This Stage 6 VQ35 Long Block is good for someone who wants to push the limits of their turbo charged Nissan 350z or Infiniti G35 without the worry of detonation. The stage 3 package is good for up to 650 Rwhp(We strongly recommend a sleeved block for over 650 Rwhp).
 VQ35DE Engine Build 6
This Package includes:

Products in bold are upgraded from previous stage

CP or Arias Extreme Pistons .020 over
Pauter or Carillo Rods
ARP Rod Bolts
Block inspected and cleaned
Block redecked
Block Bored and Honed using a Torque Plate
Rotating assembly balanced
Crank magnafluxed and the journals micro-polished
New ARP main studs (torqued to 60 ft/lbs)
Line bore the main bearings to cold oil main bearing clearance
New Multi-layer steel Head Gaskets
New ARP head studs (torqued to 95 ft/lbs)
New Moly coated Race Spec main bearings installed
New Moly coated Race Spec rod bearings installed
Block assembled
New OEM Head Gaskets
Heads inspected and cleaned
Heads redecked
JWT S1, S2, C2, or "S7 RevUp" Upgraded Cams
JWT Heavy Duty Valve Springs
5 angle radius cut valve job
New OEM Valve stem seals installed
Valve Stem Heights set
Cold Clearance set for stock cams
Heads assembled
New OEM Rev-up Oil Pump

Stage 7 VQ35 Long Block - Nissan 350z/Infiniti G35
Item# VQ-Stage7-Long
Regular price: $11,900.00
Product Description
 
This Stage 7 VQ35 Long Block is good for someone who wants to push the limits of their turbo charged Nissan 350z or Infiniti G35 without the worry of detonation. The stage 3 package is good for up to 750 Rwhp.
VQ35DE Engine Build 7
This Package includes:

Products in bold are upgraded from previous stage

CP or Arias Extreme Pistons .020 over
Pauter or Carillo Rods
ARP Rod Bolts
Block inspected and cleaned
Block redecked
Block Bored and Honed using a Torque Plate
Rotating assembly balanced
Crank magnafluxed and the journals micro-polished
New Billet girdle
New ARP main studs (torqued to 60 ft/lbs)
Line bore the main bearings to cold oil main bearing clearance
New Moly coated Race Spec main bearings installed
New Moly coated Race Spec rod bearings installed
Block assembled
New Supertech block guards
New Multi-layer steel Head Gaskets
New ARP head studs (torqued to 95 ft/lbs Heads inspected and cleaned
Heads redecked
JWT S1, S2, C2, or "S7 RevUp" Upgraded Cams
JWT Heavy Duty Valve Springs
5 angle radius cut valve job
New OEM Valve stem seals installed
Valve Stem Heights set
Cold Clearance set for stock cams
Heads assembled
New OEM Rev-up Oil Pump

Stage 8 VQ35 Long Block - Nissan 350z/Infiniti G35
Item# VQ35-Stage8-Long
Regular price: $16,500.00
Product Description
 
This Stage 8 VQ35 Long Block is good for someone with a Twin turbo system and/or Nitrous on their Nissan 350z or Infiniti G35 that wants ultimate strength when pushing the limits. The stage 4 package is good for up to 1200 Rwhp.
VQ35DE Engine Build 8
This Package includes:

Products in bold are upgraded from previous stage

CP Pistons or Arias Extreme .020 over
Pauter or Carillo Rods
ARP Rod Bolts
ARP Main Studs
ARP L19 Head Studs
Darton Mid Sleeves installed on CNC machine
Block inspected and cleaned
Block redecked
Block Bored and Honed using a Torque PlateVQ35DE Engine Build 10
Rotating assembly balanced
Crank magnafluxed and the journals micro-polished
New Moly coated Race Spec main bearings installed
New Moly coated Race Spec rod bearings installed
Block assembled
Cometic Head Gaskets(can be upgraded to HKS)
Heads inspected and cleaned
Heads redecked
Extreme Ported exhaust and intake runners
Bowl Work Done
Ferrea Oversize Intake and Exhaust Valves
Ferrea Heavy Duty Valve Springs
Ferrea Titanium Retainers
Ferrea Valve Spring LocatorsVQ35DE Engine Build 9

Ferrea Valve Locks
5 angle radius cut valve job
New OEM Valve stem seals installed
Valve Stem Heights set
Cold Clearance set for stock cams
Heads assembled
New OEM Rev-up Oil Pump
 
 

 

 

Services-Engine-Builds-VG30DETT Services-Engine-Builds-SR20DET

 

Note on Engine Builds

These Race Motors do not come with ANY warranty of any kind either expressed or implied. We are not building the entire rotating assembly. We are not installing the timing components (timing belts, chains, guides, tensioners, etc.). We are NOT supplying the fuel system components and we are NOT providing the installation services. We are NOT the one’s tuning your high performance engine. And finally, we are NOT the one’s driving the car. Therefore, our Race motors are just that... they are for racing purposes and the responsibility falls on the car builder and owner 100%.

ZFever's Galleries

Project-Cars

Customer-Cars

ZFever-in-the-Media

Dyno-Sheets

Current-Hottest-Project


About UsServicesTech DocsGalleriesShare it!