Z Fever / Fever Racing

Fever Racing VG30DETT

Engine build Stages

Stage 1 VG30 Long Block - Nissan 300ZX

This Stage 1 Nissan VG30 Long Block engine package is perfect for the Nissan 300zx that needs a fresh rebuild and is going to stay with stock turbos or sport 500 size turbos. The Stage 1 VG30 Long block comes with a full one year warranty against defects and comes with our 10+ years experience on building Nissan motors.

Cost: $4800

This Package Includes:

Wiseco Pistons
Shotpeened Stock Rods
ARP Rod Studs
Block Inspected and acid dipped
Block redecked
Block water passage bored out for more water to back cylinders
Block Bored and Honed using a Torque Plate
Crank center weight tig welded into place
Crank balanced
New Moly Coated Race Spec Main bearings installed
New Moly Coated Race Spec Rod bearings installed
Block prepped and assembled
Heads inspected and cleaned
Heads Pressure Tested
Heads redecked
Cleaned exhaust and intake runners
3 angle valve job
Valve heights set
Heads prepped and assembled
New OEM Valve stem seals
New OEM Cam Seals
New OEM Head Gaskets
New OEM Oil Pump
New OEM Oil Pump Gasket

Stage 2 VG30 Long block – Nissan 300ZX

This Stage 2 Nissan VG30 Long Block engine package is perfect for a Nissan 300zx that needs a fresh rebuild and is going with slightly upgraded turbos.

Cost $5100

This Package Includes:

Products in bold are upgraded from previous stage

Wiseco Pistons
Shotpeened Stock Rods
ARP Rod Studs
Block Inspected and acid dipped
Block redecked
Block water passage bored out for more water to back cylinders
Block Bored and Honed using a Torque Plate
Crank center weight tig welded into place
Crank balanced
New Moly Coated Race Spec Main bearings installed
New Moly Coated Race Spec Rod bearings installed
Block prepped and assembled
Heads inspected and cleaned
Heads Pressure Tested
Heads redecked
Ported exhaust and intake runners
5 angle radius cut valve job
Valve heights set
New OEM Valve stem seals
Heads prepped and assembled
New OEM Cam Seals
New OEM Head Gaskets
New OEM Oil Pump
New OEM Oil Pump Gasket

Stage 3 VG30 Long Block - Nissan 300zx

This Stage 3 Nissan VG30 Long Block engine package is perfect for a Nissan 300zx that needs a fresh rebuild and wants some extra power and strength at the same time.

Cost $5900

This Package Includes:

Products in bold are upgraded from previous stage

Wiseco Pistons
Eagle/SCAT H Beam Rods
ARP Rod Studs
Block Inspected and acid dipped
Block redecked
Block water passage bored out for more water to back cylinders
Block Bored and Honed using a Torque Plate
Crank center weight tig welded into place
Crank balanced
New Moly Coated Race Spec Main bearings installed
New Moly Coated Race Spec Rod bearings installed
Block prepped and assembled
Heads inspected and cleaned
Heads Pressure Tested
Heads redecked
Ported exhaust and intake runners
5 angle radius cut valve job
Valve heights set
New OEM Valve stem seals
Heads prepped and assembled
New OEM Cam Seals
New OEM Head Gaskets
New OEM Oil Pump
New OEM Oil Pump Gasket

Stage 4 VG30 Long Block - Nissan 300zx

This Stage 4 Nissan VG30 Long Block engine package is perfect for a Nissan 300zx that needs a fresh rebuild and needs a good power band for bigger turbos plus strength at the same time.

Cost $7100

This Package Includes:

Products in bold are upgraded from previous stage

Wiseco Pistons
Eagle/SCAT H Beam Rods
ARP Rod Studs
Block Inspected and acid dipped
Block redecked
Block water passage bored out for more water to back cylinders
Block Bored and Honed using a Torque Plate
Crank center weight tig welded into place
Crank balanced
New Moly Coated Race Spec Main bearings installed
New Moly Coated Race Spec Rod bearings installed
Block prepped and assembled
JWT Cams(Your Choice)
JWT HD Valve Springs
JWT Cam Sprocket Adapters
Heads inspected and cleaned
Heads Pressure Tested
Heads redecked
Ported exhaust and intake runners
5 angle radius cut valve job
Valve heights set
New OEM Valve stem seals
Heads prepped and assembled
New OEM Cam Seals
New OEM Head Gaskets
New OEM Oil Pump
New OEM Oil Pump Gasket

Stage 5 VG30 Long Block - Nissan 300zx

This Stage 5 Nissan VG30 Long Block engine package is perfect for a Nissan 300zx that needs a fresh rebuild and needs a good power band for bigger turbos plus strength at the same time. This package offers more flow through the heads with the addition of the bigger valves. This helps spool up and top end power. It also includes Cometic metal head gaskets for extra security.

Cost $8700

This Package Includes:

Products in bold are upgraded from previous stage

Wiseco Pistons
Eagle/SCAT H Beam Rods
ARP Rod Studs
Block Inspected and acid dipped
Block redecked
Block water passage bored out for more water to back cylinders
Block Bored and Honed using a Torque Plate
Crank center weight tig welded into place
Crank balanced
New Moly Coated Race Spec Main bearings installed
New Moly Coated Race Spec Rod bearings installed
Block prepped and assembled
JWT Cams(Your Choice)
JWT HD Valve Springs
JWT Cam Sprocket Adapters
Ferrea 1mm Oversize Valves
Heads inspected and cleaned
Heads Pressure Tested
Heads redecked
Ported exhaust and intake runners
5 angle radius cut valve job
Valve heights set
New OEM Valve stem seals
Heads prepped and assembled
New OEM Cam Seals
New Cometic Metal Head Gaskets
New OEM Oil Pump
New OEM Oil Pump Gasket

Stage 6 VG30 Long Block - Nissan 300zx

This Stage 6 Nissan VG30 Long Block engine package is for a Nissan 300zx that wants serious power and the strongest engine available. This package will be good for up to 1200Rwhp and 8000 Rpm Rev Limit. This is not for the faint at heart!!

Cost $12,500

This Package Includes:

Products in bold are upgraded from previous stage

CP Pistons with full ceramic/moly coatings
Pauter or Carillo Rods
ARP Rod Studs
ARP Main Studs
Block Inspected and acid dipped
Block redecked
Block water passage bored out for more water to back cylinders
Block Bored and Honed using a Torque Plate
Crank center weight tig welded into place
Crank balanced
New Moly Coated Race Spec Main bearings installed
New Moly Coated Race Spec Rod bearings installed
Block prepped and assembled
ARP Head Studs
Tomei Cams(Your Choice)
Tomei HD Valve Springs
Tomei Solid Lifters
Titanium Retainers
Ferrea 1mm Oversized Valves
Heads inspected and cleaned
Heads Pressure Tested
Heads redecked
Ported exhaust and intake runners
5 angle radius cut valve job
Combustion Chamber work
Valve heights set
New OEM Valve stem seals
Heads prepped and assembled
New OEM Cam Seals
New Cometic Metal Head Gaskets
New OEM Oil Pump
New OEM Oil Pump Gasket

Engine will come with Heads bolted to block and torqued to spec

Note on Engine Builds

These Race Motors do not come with ANY warranty of any kind either expressed or implied. We are not building the entire rotating assembly. We are not installing the timing components (timing belts, chains, guides, tensioners, etc.). We are NOT supplying the fuel system components and we are NOT providing the installation services. We are NOT the one’s tuning your high performance engine. And finally, we are NOT the one’s driving the car. Therefore, our Race motors are just that... they are for racing purposes and the responsibility falls on the car builder and owner 100%.

Z Fever / Fever Racing

Z Fever Logon

Zfever Video

Z Fever Map

Note on Engine Builds

ZFever's Galleries